福特GT40 - 1969勒芒冠军 - 旧化版

1:18 比例
有存货
订单通常会在 3-5 个工作日内发货。

技术详情

  • 简介
  • 比例指南

  • 仅限量 250 件
  • 基于在 1969 年 6 月 14 日和 15 日于萨尔特赛道举行的勒芒 24 小时耐力赛中,由杰基·伊克斯(Jacky Ickx)和杰基·奥利弗(Jackie Oliver)驾驶取得胜利的底盘#1075
  • 该模型附带一张 A2 档案级高质量喷墨打印的赛车在赛道上获胜后在维修区通道巡航的照片
  • 布里斯托尔的工匠们使用档案图像精确地应用风化细节
  • 1:18 比例模型,超过 22 厘米/8.8 英寸长
  • 采用最优质的材料制成
  • 开发该模型花费了超过 800 小时
  • 精确设计的部件:铸件、光刻和数控加工金属部件
  • 在福特档案和遗产部门以及海湾石油国际公司的协助与合作下制造
  • 官方授权的勒芒 24 小时耐力赛产品
  • 我们极其兴喜地推出赛车风化模型这款不断扩充中系列的最新模型:1:18 比例的福特 GT40,它曾在 1969 年的勒芒 24 小时耐力赛中取得胜利。这一独特版本仅限量 250 个模型,将由我们的模型大师精心手工绘制和细致处理,以展现 1969 年 6 月 14 日和 15 日在萨尔特赛道上,杰基·伊克斯(Jacky Ickx)和杰基·奥利弗(Jackie Oliver)驾驶该车取得胜利时赛车上的每一处比赛污垢细节。限量版中的每个模型都将附带一张档案级高质量 A2 肖像尺寸的赛车在比赛胜利后的喷墨打印照片,这是由阿马尔加姆从赛车运动图像收藏中挑选出来的。

    福特GT40是有史以来最具标志性的赛车之一,它的诞生出自赛车界最臭名昭著的怨恨,亨利·福特二世在未能获得法拉利的公司所有权后两手空空回到美国,并宣布他希望在勒芒赛场粉碎法拉利。结果造就了这款完全实现福特期望的汽车。

    从1964年到1969年,GT40的诞生和发展是非常短暂的。尽管福特拥有巨大的财富和生产能力,却缺乏宝贵的赛车专业知识。福特与总部位于英国的罗拉车主兼首席设计师埃里克·布罗德利谈判达成协议,并派遣英国工程师罗伊·伦恩回到英国,在该项目中扮演关键角色。在美国设计师哈利·科普的监督下,布罗德利、伦恩和前阿斯顿·马丁车队老板约翰·威尔的团队开始在布罗姆利的罗拉工厂生产这款新车。1963年底,在威尔的指导下,车队搬到了在Slough新成立的福特先进车辆部门总部。1963年8月,迈凯轮汽车公司的布鲁斯·迈凯轮受命对一辆原型车进行评估,之后工作进展迅速,尽管它几乎没能及时完成,从而得以公之于众。第一辆GT40, 也就是GT/101(“GT40”的绰号来源于车身高度:从地面到挡风玻璃顶部有40英寸高),于1964年4月1日在英国展出,不久之后在纽约展出。赛车价格为5200英镑(相当于今天的10.3万英镑)。

    在数周后的勒芒测试中,GT40虽然极速能达到惊人的时速200英里(约321.9公里),但到了时速170英里(约273.6公里)时赛车就出现了严重的稳定度问题。 尽管GT 40有着难以置信的声誉,但第一年的比赛并不顺利,陆续参加了纽伯格林1000公里耐力赛, 勒芒24小时耐力赛和法国兰斯12小时耐力赛,但全部以退赛告终。到当年年底,尽管仍在制造GT40,但威尔还是把GT40项目交给了美国前传奇赛车手卡罗尔·谢尔比。谢尔比将4.2升的发动机换成了他曾经在眼镜蛇车队使用过的7.0升V8发动机,与新的ZF变速器相匹配。搭配新的动力单元,GT40在1965年的代托纳比赛中取得了它的第一个胜利,接着在赛百灵获得第二名。然而,勒芒赛却是一场灾难,由于机械故障,五辆赛车都未能完成比赛。

    1966年标志着GT40传奇的开始。在代托纳的1-2-3场胜利之后很快又在赛百灵取得了另一场胜利。然而,福特觊觎的却是勒芒皇冠。福特为那一年的比赛集结了一支大军:9辆车,100多名人员和21吨的备件。福特击败了法拉利,与前三名完成比赛的车手包揽了领奖台,并成为第一个在勒芒取得胜利的美国制造商。GT40在接下来的三年里赢得了勒芒冠军,使GT40成为有史以来最具标志性的赛车之一。从那以后,法拉利就再也没有赢得过勒芒的冠军。

    这些车模将随附一张精美的Giclée艺术印刷照片,出自摄影师Rainer Schlegelmilch之手。照片拍摄的是1969年勒芒24小时耐力赛获胜后赛车在维修通道上巡游的场景。Giclée印刷品将采用档案级艺术纸张,图片尺寸约为 30x83厘米(12x32 英寸)。

    这款完美的1:18比例福特GT40模型以1969年在勒芒24小时耐力赛中夺冠的 1075号底盘为原型。由Jacky Ickx和Jackie Oliver驾驶的6号赛车创造了勒芒 24小时耐力赛历史上最接近终点的记录,也是赛车史上最伟大的记录之一,在跑完372圈后仅以120米(390 英尺)的差距击败了Hans Hermann的保时捷908。这是一个典型的落后者的故事: 保时捷已经在十场比赛中的三场比赛中夺得了世界跑车锦标赛的冠军,并且是首次赢得勒芒赛冠军的热门车手。16辆保时捷赛车参赛,占全场三分之一强,保时捷在比赛中90%的时间都处于领先地位。然而,领先的917赛车的变速箱在上午11点发生故障,由Ickx和Oliver驾驶的福特赛车夺得了领先位置。比赛在3小时的冲刺中结束,福特车因排气故障而被保时捷908车手Herrmann和Gérard Larrousse紧追不舍。Ickx知道,如果他在穆萨直道上领先,Herrmann就会超越,但他可以滑行超越Herrmann,然后在剩下的一圈中保持领先。赛车冲过终点线时只剩下不到一分钟的时间,因此还需要再跑一圈。福特车以前只用一箱油跑过23圈,但现在突然需要多跑一圈。Ickx假装因缺油而动力不足,让Herrmann在穆萨直道上提前超过了他,然后在5公里直道终点前利用滑行再次超过了他。Ickx击败了Herrmann,第一个冲过终点线,保时捷车队又一次无缘冠军。

    更令人印象深刻的是,这辆胜利冲过终点线的车并不是当年的新车,而是前一年由佩德罗·罗德里格斯和卢西安·比安奇驾驶并获得勒芒冠军的旧款。Ickx将车队的胜利献给了当年早些时候去世的前冠军比安奇。在比赛开始时Jacky Ickx不紧不慢地走向自己的赛车、坐好、绑上安全带, 以此来抗议“勒芒式”发车,就在前一年保时捷车手约翰·伍尔夫因未系安全带在事故中被甩出赛车重伤过世。

    福特 GT40 的竞赛风化版仅限量 250 件。

    注意:这是一个“路边”模型,没有任何活动部件。

    操作旧化模型

    请注意,Amalgam 的旧化模型非常脆弱,需要小心处理。 我们建议您尽可能少的操作模型以避免破坏做旧效果。 操作模型时,请遵守购买时产品随附的说明。图片中包含的画笔纯粹是为了展示模型的比例。 我们不建议您对我们的旧化模型进行任何清洁,因为这可能会消除一些做旧细节。

    预订

    定制款

    In order for us to create your bespoke model, you will need to choose 4 extra options. Paint colour, interior colour, wheel style and caliper colour.

    Please complete the form and a member of our Sales Team will contact you.

    提交此联系表,即表示您同意我们存储您的信息并就此特定型号与您联系。

    联系我们

    请与我们联系以获取有关订购此型号的更多信息。

    提交此联系表,即表示您同意我们存储您的信息并就此特定型号与您联系。

     

    Buy now, pay later

    Pay in interest-free installments with Splitit using your Mastercard and Visa credit cards (no debit cards).

    Quick and Easy

    No credit checks, no paperwork, only fill in your card details

    Interest-free

    Splitit will not charge any interest

    HOW IT WORKS

    SplitIt®
    Simply select Splitit at checkout and enter your card details
    No credit checks required but the total amount is held in reserve on your card to ensure payment
    Your first payment is taken immediately. The rest will be paid automatically in monthly installments

    EXAMPLE

    Order Total
    £2000
    Pay Today
    £500 (Total of £1500 held on card)
    2ND INSTALMENT
    £500 (Total of £1000 held on card)
    3RD INSTALMENT
    £500 (Total of £500 held on card)
    4TH INSTALMENT
    £500 (Total of £0 held on card)
    IMPORTANT NOTE:
    • A PAYMENT AUTHORISATION FOR THE OUTSTANDING AMOUNT OF YOUR PURCHASE WILL BE HELD DURING THE FULL PLAN PERIOD as security. This hold will be charged ONLY in the event a monthly payment is declined (the authorisation hold might appear as "Pending" on your credit card bill).
    • You must maintain a sufficient "Required Available Credit" amount on your credit card for both the full outstanding amount of your purchase and the monthly payment during the full period of the plan.
    • Your credit card issuer may charge you interest on amounts charged to your credit card unless you pay Your credit card balance in full each month.
    • In case we do not manage to reauthorize the remaining amount of the transaction, you will receive a notice email. In that case, you will have to promptly update your credit card details. In case your bank still refuses to reauthorize the outstanding amount, we will have to charge the full outstanding amount of the transaction at once from your credit card.
    Splitit offers you a flexible way of paying for items in instalments, completely interest-free, by reserving the available line of credit on your credit card. Then, each month, according to your payment plan, Splitit collects the instalment amount and reissues the authorisation request for the remaining balance.

    It is important to note that payments are still charged on your existing credit card. Splitit simply provides you the method to do this and information about the instalments. Here is an example of how the service works for a customer buying a £2,000 model in 4 instalments of £500 each:

    Splitit obtains authorisation from the credit card company for the full purchase amount of £2,000. This is not a charge on the card; it is simply reserving £2,000 from the customer’s line of credit.
    - The credit card company then charges the customer £500 for the first payment.
    - During the second month, Splitit requests authorisation for the outstanding purchase amount of £1,500, and charges the customer the second installment of £500.
    - This authorisation and charge process continues until the full £2,000 is collected - in this case, for 4 months.
    No, this is an interest-free payment method with no additional fixed fees, service fees, interest or hidden fees of any kind.
    No, your item will be processed after the first initial instalment and delivered as normal upon passing our Quality Control check at Head Office.
    - You can pay using Splitit with a valid Mastercard or Visa
    Nothing, no credit check is required if you use a Splitit instalment plan and there is no impact on your credit score. All the bank sees is the individual instalment charges each month. If one of your payment authorisations is declined, there is still no affect on your credit rating; it is simply a declined charge. The denial would simply accelerate payment of the remaining balance (unless you provide a different card which was not denied).
    You can pay using Splitit with a Mastercard or Visa. Debit cards, American Express and pre-paid cards are not accepted.
    The instalments appear on your statement as individual charge items with the name of 'Amalgam Collection'. These payments will appear monthly according to your instalment plan, with the same charge amount each time.
    For further information visit: https://www.splitit.com/faq/