McLaren MP4/6 (1991) GP de Japón

Contáctenos

Powered by Honda’s third engine configuration in just four seasons, the MP4/6 appeared somewhat of a gamble for McLaren before the 1991 season. The new V12 unit was longer, heavier and thirstier than the V10s which powered many of McLaren’s rivals, but it was hoped that the output of around 720 bhp would compensate for it. During engine testing, when using the MP4/5C chassis, it failed to convince reigning world champion Ayrton Senna who was quick to tell the Japanese engineers what he thought of it in his usual candid terms. The Japanese stuck to their guns however, claiming that Honda engines are made for reliability rather than power. With the benefit of hindsight, they were right. Senna and McLaren made a flying start to the season: four victories in the opening four races, whilst his team-mate Gerhard Berger achieved two podiums. The increased engine weight was being partly offset by the latest development of McLaren’s six-speed gearbox.

The car itself, whilst looking similar to the previous year’s MP4/5B, was quite different in terms of its aerodynamic profile as designer Neil Oatley and his team had received some valuable input from Henri Durand who had joined from Ferrari in mid-1990. Numerous changes had to be made to the chassis, not least in order to accommodate the longer engine and the enlarged fuel cell needed to satisfy its greater thirst. Even with four centimetres added to its length, the new tub was much stiffer in terms of torsional rigidity and consisted of even fewer basic components than before. There were changes to the suspension too, an aspect of the car which had altered dramatically since the year before, with pushrod-activated coil-spring dampers now mounted on top of the chassis ahead of the cockpit instead of being installed vertically either side of the footwell.

Senna’s perfect start had given McLaren a comfortable lead in the constructors’ championship and the margin gained was to prove crucially important as the team's performance began to slip. A double retirement in Montreal gave the team a reality check, whilst their closest rivals Williams-Renault began to gather pace as their V10 power unit’s reliability improved. The increased fuel consumption of the Honda V12 posed challenges of its own. Despite plenty of development on the engine management system, Senna ran out of fuel twice during the season, at Silverstone on the way back to the pits and at Hockenheim on the final lap. After the German Grand Prix, Williams snuck ahead of McLaren, leading the way by one point. Undeterred, Honda continued developing its V12, improving mid-range punch and reducing friction problems with new specs through the season. New linked rocker arms were also employed in a bid to reduce roll, and a cockpit-adjustable ride-height mechanism was also added.

In Budapest, the MP4/6 regained its form in the nick of time, as Senna claimed victory with a fine drive, ending a five-race winless streak. At the following race at Spa, despite suffering a gearbox failure, he was victorious once again, leading Berger in a 1-2 finish. However, their rivals responded, commanding the field in both the Portuguese and Spanish races, the last of which saw Senna struggling on the wrong tyres, retaking the lead in the championship. At the penultimate race in Suzuka, Berger scored his sole victory of the season, and his first for McLaren, having been handed victory by Senna in another one-two finish. This left Senna in an unassailable position on 96 points, winning his third and last title, while Berger finished fourth with 43 points. McLaren sealed the championship in the final race of the season, at a torrentially rain-soaked Australian Grand Prix which was forced to conclude after 14 laps.

Overall, the MP4/6 scored eight wins, 11 further podiums, 10 pole positions, five fastest laps, and 139 points, earning Senna the Drivers’ Championship and McLaren the Constructors’ Championship.

This fine 1:8 scale model of the McLaren MP4/6 has been handcrafted and finished in our workshops using detailed colour and material specifications, and original CAD data supplied directly from McLaren Racing. Furthermore, it has undergone detailed scrutiny by both engineering and design teams to ensure complete accuracy of representation.

--------------------------------------------------------------

Elevate your 1:8 scale collection with one of our elegant, harmonious and handcrafted display cabinets, stands or plinths.

View Display Cabinets for this model >

Pre-pedido

Hecho a medida

Para que podamos crear tu modelo a medida, tendrás que elegir 4 opciones extra. Color de la pintura, color interior, estilo de rueda y color del calibrador.

Por favor, rellene el formulario y un miembro de nuestro equipo de ventas se pondrá en contacto con usted.

Al enviar este formulario de contacto, usted da su consentimiento para que almacenemos su información y nos comuniquemos con usted con respecto a este modelo específico.

Contáctenos

Por favor, contáctenos para más información sobre cómo pedir este modelo.

Al enviar este formulario de contacto, usted da su consentimiento para que almacenemos su información y nos comuniquemos con usted con respecto a este modelo específico.

 

Compre ahora, pague después

Pague en cuotas sin intereses con Splitit usando su tarjeta de crédito Mastercard y Visa (no tarjetas de débito).

Rápido y fácil

Sin verificaciones de crédito, sin papeleo, sólo rellene los datos de su tarjeta

Sin intereses

Splitit no cobrará ningún interés

CÓMO FUNCIONA

SplitIt®
Simplemente seleccione Splitit en la caja e introduzca los datos de su tarjeta
No es necesario comprobar el crédito, pero el importe total se mantiene en reserva en su tarjeta para asegurar el pago
El primer pago se hace inmediatamente. El resto se pagará automáticamente en cuotas mensuales

ÖRNEK

Total del pedido
£2000
Paga hoy
£500 (Total de £1500 en la tarjeta)
2º INSTALACIÓN
£500 (Total de £1000 en la tarjeta)
3ER INSTALACIÓN
£500 (Un total de 500 libras en la tarjeta)
4º INSTALACIÓN
£500 (Total de £0 en la tarjeta)
NOTA IMPORTANTE:
  • Una autorización de pago por la cantidad restante de su compra se mantendrá durante el período del plan completo como seguridad. Esta retención será cargada SOLO en caso de que un pago mensual sea rechazado (la retención de autorización podría aparecer como "Pendiente" en la factura de su tarjeta de crédito).
  • Debe mantener una cantidad suficiente de "Crédito Disponible Requerido" en su tarjeta de crédito tanto para la cantidad total pendiente de su compra como para el pago mensual durante todo el período del plan.
  • El emisor de su tarjeta de crédito puede cobrarle intereses sobre las cantidades cargadas a su tarjeta de crédito a menos que pague el saldo total de su tarjeta de crédito cada mes.
  • En caso de que no logremos reautorizar el monto restante de la transacción, recibirá un correo electrónico de notificación. En ese caso, deberá actualizar rápidamente los datos de su tarjeta de crédito. En caso de que su banco siga negándose a reautorizar el importe pendiente, tendremos que cargar de una vez el importe total pendiente de la transacción en su tarjeta de crédito.
Splitit le ofrece una forma flexible de pagar los artículos a plazos, sin intereses, reservando la línea de crédito disponible en su tarjeta de crédito. Luego, cada mes, según su plan de pago, Splitit cobra el importe de la cuota y vuelve a emitir la solicitud de autorización para el saldo restante.

Es importante tener en cuenta que los pagos se siguen cargando en su tarjeta de crédito actual. Splitit simplemente le proporciona el método para hacerlo e información sobre los plazos. Aquí hay un ejemplo de cómo funciona el servicio para un cliente que compra un modelo de 2.000 libras en 4 cuotas de 500 libras cada una:

Splitit obtiene la autorización de la compañía de la tarjeta de crédito por el monto total de la compra de 2.000 libras. Esto no es un cargo en la tarjeta, es simplemente reservar 2.000 libras de la línea de crédito del cliente.
- La compañía de la tarjeta de crédito cobra al cliente 500 libras por el primer pago.
- Durante el segundo mes, Splitit solicita autorización para la cantidad de compra pendiente de 1.500 libras, y cobra al cliente la segunda cuota de 500 libras.
- Este proceso de autorización y cobro continúa hasta que se cobren las 2.000 libras, en este caso, durante 4 meses.
No, se trata de un método de pago sin intereses, sin cuotas fijas adicionales, sin tasas de servicio, sin intereses o cargos ocultos de ningún tipo.
No, su artículo se procesará después del primer plazo inicial y se entregará como de costumbre al pasar nuestro control de calidad en la oficina central.
- Puedes pagar usando Splitit con una Mastercard o Visa válida
Nada, no se requiere una verificación de crédito si se utiliza un plan de cuotas Splitit y no hay ningún impacto en su puntuación de crédito. Todo lo que el banco ve son los cargos por cuotas individuales cada mes. Si una de sus autorizaciones de pago es rechazada, todavía no hay ningún efecto en su calificación crediticia; es simplemente un cargo rechazado. La denegación simplemente aceleraría el pago del saldo restante (a menos que proporcione una tarjeta diferente que no haya sido denegada).
Puedes pagar usando Splitit con una Mastercard o Visa. No se aceptan tarjetas de débito, American Express ni tarjetas de prepago.
Los plazos aparecen en su estado de cuenta como artículos de cargo individual con el nombre de "Colección de Amalgamas". Estos pagos aparecerán mensualmente de acuerdo a su plan de cuotas, con la misma cantidad de cargos cada vez.
Para más información, visite https://www.splitit.com/faq/